EN
WWW.NIKOLAOUTOOLS.GR
4
PARTS NO DESCRIPTION
Q’TY
001
HYDRAULIC PUMP ASS’Y
1
002
LINK
1
003
PIN
1
004
COTTER PIN
1
005
SPINDLE, RELEASE VALVE
1
006
PIN
1
006 -1
CLIP
1
007
LINK
1
008
PIN
1
009
SNAP – RING “C”
2
010
SPINDLE, PUMP PISTON
1
011
PIN
1
012
SNAP – RING “C”
2
013A
FRAME, RH KIT
1
023A
ADJUSTING SCREWS ASS’Y
2
026A
CASTER FORK ASS’Y
2
029
BALL BEARING
2
032
NUT M12
2
033
NUT M10
2
034
FRONT SPINDLE
1
035
SPACING COLLAR
2
036
WASHER
2
037
BUSH, FRONT WHEEL
2
038
FRONT WHEEL
2
039
WASHER
2
040
NUT M20
2
041
LIFTING ARM, STOP ROD
1
PARTS NO
DESCRIPTION
Q’TY
042
WASHER
2
043
NUT M16
2
044A
FRAME, LH KIT
1
049
WASHER
6
050
BOLT M10 x 16
2
051
RETURN SPRING
1
052
BACK LIFTING ARM
1
053
LIFTING ARM SPINDLE
1
054
BOLT
1
055
BUSH
4
056
BOLT M12 x 65
4
057
WASHER
8
058
NUT M12
8
059
FRONT LIFTING ARM
1
060
PLATFORM
1
061
BUSH
4
063
BOLT M12 x 40
4
064
VICE
1
065
BOLT M10 x 25
2
066
SLIDING PLATE
1
067
GUARDED PLATE
1
068
BOLT M8 x 20
2
P23
NUT M8
2
069
LEADING PLATE
1
070
COTTER PIN
2
071
FOOT PEDAL, LIFT
1
072
FOOT PEDAL, RELEASE
1
073
SET SPINDLE
1
074
SPRING WASHER
10
CAUTIONS:
1.The vented plug (p37) can be used for fuelling or releasing.
2. Before operation, be sure to fix the Motorcycle Lift on floor with Adjusting Screws (023A) to prevent the Lift from sliding during
operation.
3. After placing the motorcycle onto the platform, be sure to use the vice (064) to lock front wheel of the motorcycle to prevent it
from slipping, tilting over, or falling.
4. After lifting, be sure to insert Set Spindle (073) into Front Lifting Arm to prevent from unintentional slow lowering.
5. To mark nominated capacity as 400kgs, be sure to load under its limited capacity installed with Safety Valve to prevent over-
load.
PARTS LIST
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these chang
-
es significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your
hands may also concern other models of the manufacturer's product line with similar features and may not be included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, includ
-
ng maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even seri
-
ous injury or death. The manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment
.
Fig. 4
