EN
WWW.NIKOLAOUTOOLS.GR
2
1.Hydraulic Motorcycle Lift is operated by one Foot Pedal to Lift and by another foot pedal to release.
2.With Safety Valve to prevent overload.
3.With Guarded Plate above Releasing Foot Pedal to prevent unintentional lowering.
4.After lifting, a Set Spindle can be used to control lifting height to prevent unintentional slow lowering.
5.With Leading Plate, the motorcycle can be easily moved onto the platform.
6.A locking front wheel vice prevents the motorcycle from slipping, tilting over, or falling.
7.A Sliding Plate facilitates back wheel removal.
8.The Motorcycle Lift can be anchored to floor with two adjusting screws to prevent it from sliding.
9.The Hydraulic Motorcycle Lift can be moved easily with four wheels.
FEATURES
Fig. 1
ASSEMBLY INSTRUCTIONS
1. Attach Sliding Plate (066) to the Platform.
2. Attach Leading Plate (069) to the holes in the back of platform and use Washer (049) and Cotter Pin (070) to prevent from slipping off.
3. Put the Vice (064) to nominated place and fix it on the platform with M10 x 25L Bolt (065), Washer (049) and Nut (033).
4. Insert Lifting Foot Pedal (071) into Spindle of Pump Piston.
5. Insert Releasing Foot Pedal (072) into Spindle of Release Valve.
6. Attach Guarded Plate (067) to Frame of Releasing Foot Pedal and fix it with M8 x 20L Bolt (068) and Nut (p23).
Fig. 2
PARTS NO
DESCRIPTION
Q’TY
P23
NUT
2
023A
ADJUSTING SCREWS ASSEMBLY
2
033
NUT
2
049
WASHER
4
060
PLATFORM
1
064
VISE
1
065
BOLT M10 x 25
2
066
SLIDING PLATE
1
067
GUARDED PLATE
1
068
BOLT M8 x 20
2
069
LEADING PLATE
1
070
COTTER PIN
2
071
FOOT PEDAL, LIFT
1
072
FOOT PEDAL, RELEASE
1
073
SET SPINDLE
1
