6
WWW.BORMANNTOOLS.COM
WWW.BORMANNTOOLS.COM
EN
EN
Maintenance
1. Change the air filter
Change the air filter if it is soiled. Release the cover fastening from the machine, place the air
filter in the cover. Push the cover back onto the machine.
WARNING! Never operate the machine without the air filter; dirt could be sucked in and inter
-
fere with the function of the machine.
Troubleshooting
Problem
Cause
Remedy
No coating material emerges from
the nozzle
Nozzle clogged
Feed tube clogged
Material volume setting turned too far to the downside (-)
Feed tube loose
No pressure build-up in container
Viscosity of coating material too high
Clean
Clean
Turn to the upside (+)
Insert
Tighten container
Thin the paint
Coating material drips from the
nozzle
Nozzle loose
Nozzle worn
Coating material assembly at air cap, nozzle or needle
Tighten nozzle
Change nozzle
Clean
Atomisation too coarse
Viscosity of coating material too high
Material volume too large
Nozzle contaminated
Air filter heavily soiled
Too little pressure build-up in container
Thin
Turn material volume adjusting screw to the
downside (-)
Clean
Change
Tighten container
2. Correction of Malfunctions
Environmental protection
The appliance and accessories should be recycled in an environmentally friendly way. Do not
dispose of the appliance with household waste. Support environmental protection by taking the
appliance to a local collection point or obtain information from a specialist retailer.
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the prod-
ucts. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line with similar features and may not be included in
the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or
for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by tech-
nicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer
shall not be liable for injuries and damages resulting from the use of non-conforming equipment.
Fig. 9