4
WWW.BORMANNTOOLS.COM
WWW.BORMANNTOOLS.COM
EN
EN
2.
Start-up
Before connecting to the mains supply, be sure that the supply
voltage is identical with the value given on the rating plate.
1. Mounting air hose. Insert the air hose coupler tightly in the
connections on the machine and the spray gun.
2. Unscrew the container from the spray gun, aligning suction
tube. The container contents are to be sprayed out almost
completely. When spraying horizontal surfaces, turn suction
tube forward (A). When spraying objects overhead, turn suc-
tion tube back (B).
3. Pour in the prepared coating material and screw the contain-
er tightly onto the spray gun.
4. Put the machine down only on a level, clean surface. Other-
wise the machine could suck in dust, etc.
5. Adjust the spray setting on the spray gun. Three different
spray jet settings can be chosen on the spray gun, depending
on the application and target object.
Three different spray jet settings can be chosen on the spray
gun, depending on the application and target object.
6. Push the ON / OFF switch on the machine and start paint-
ing.
7. Adjusting the material volume
Set the material volume by turning the regulator knob on the
trigger.
Fig. 2
Fig. 3
Fig. 4
Fig. 5