BorMann 042525, Manual, Page: 7 / 20

7
WWW.BORMANNTOOLS.COM
EN
Maintenance
Change the air filter if it is soiled (Fig. 9, item 7).
WARNING! Never operate the machine without the air filter; dirt could be sucked in and interfere with the function of the
machine.
Correction of Malfunctions follow accordingly.
Troubleshooting
Problem
Cause
Remedy
No coating material emerges from the
nozzle
Nozzle clogged
Feed tube clogged
Material volume setting turned too far to the left (-)
Feed tube loose
No pressure build-up in container
Clean
Clean
Turn to the right (+)
Insert
Tighten container
Coating material drips
from the nozzle
Nozzle loose
Nozzle worn
Nozzle seal worn
Coating material assembly at air cap, nozzle or needle
Tighten
Change
Change
Clean
Atomisation too coarse Viscosity of coating material too high
Material volume too large
Material volume adjusting screw turned
too far to the right (+)
Nozzle contaminated
Air f lter heavily soiled
Too little pressure build-up in container
Thin
Turn material volume adjusting
screw to the left (-)
Clean
Change
Tighten container
Spray jet pulsates
Coating material in container running out
Air filter heavily soiled
Refill
Change
Coating material causes "paint tears" Too much coating material applied. Turn material volume adjusting screw to the
left (-)
Too much fog of
coating material
(Overspray)
Distance to the object too large
Too much coating material applied
Reduce distance Turn material volume adjusting
screw to the left (-)
Paint in the ventilating hose Diaphragm soiled
Diaphragm defective
Clean the diaphragm
Replace the diaphragm
Environmental protection
The appliance and accessories should be recycled in an environmentally friendly way. Do not dispose of the appliance with
household waste. Support environmental protection by taking the appliance to a local collection point or obtain informa-
tion from a specialist retailer.
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the prod-
ucts. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line with similar features and may not be included in
the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or
for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by tech-
nicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death.The manufacturer and the importer shall
not be liable for injuries and damages resulting from the use of non-conforming equipment.