BorMann 042525, Manual, Page: 4 / 20

4
WWW.BORMANNTOOLS.COM
EN
Coating Materials Suitable for Use
Water- and solvent-based paints, fnishes, primers, 2-component paints, clear fnishes, automotive fnishes, staining sealers and wood sealer-preservatives.
Coating Materials Not Suitable for Use
Wall paints (emulsion paints) etc., alkali and acidic paints. Coating materials with a fash point below 21°C.
Preparation of the Coating Material
The enclosed spray attachment can be used to spray paints, varnishes and glazes that are undiluted or slightly diluted.
1. Stir the material up and put the required amount into the paint container
Thinning recommendation
Sprayed material Method
Glazes undiluted
Wood preservatives,
mordants, oils, disin-
fection agents, plant
protective agents
undiluted
Paints containing sol-
vents and water-soluble
paints, primers, vehicle
coating paints, hick-film
glazes
dilute by 5 - 10%
2. If the convey capacity is too low, add 5 - 10% dilution step-by-step until the convey capacity fulfills your requirements.
Fig. 2
Fig. 3
Fig. 4
Fig. 5