EN
WWW.BORMANNTOOLS.COM
6
Removing the floor-brush:
1. Please make sure the power switch is turned off
2. According to the manual of taking down brush
3. Get out the transparent cover of brush from brush top, then get out the roller to clean
Cleaning the neck of the floor-brush:
1. Push down neck to a straight position.
2. Clean dirt inside the neck regularly to make sure a stable suction power.
Reattaching the floor-brush:
Attention! The roller brush is installed into the floor brush, and the installation must be accurate, otherwise the roller brush cannot move on.
Match with the flower
shape
Match with the shape of
shaft