EN
WWW.BORMANNTOOLS.COM
4
Operating instructions
Charging methods of the machine
Note: Be sure to turn off the vacuum cleaner before charging it!
The display will automatically recognize when the machine is charging!
After fully charged, the machine will automatically stop charging to protect the battery, so the charger can be connected to the power for a long time without
damaging the battery.
As shown in Figure A, the machine can be directly connected to the power adapter and can be charged directly.
As shown in Figure B, the battery can be removed and charged directly.
As shown in Figure C, it can be charged on the wall mount, and the shrapnel of the machine and the charging pin can be fully charged once connected.
Vacuum floor operation
Smart Display system
1. Step on the floor brush and pull down
the vacuum cleaner to start cleaning work.
2. Turn on the switch and press the upper
button to fix the switch if necessary.
Motor Speed
Touch key
modes toggle
selector
Brush
roller block
up
Dust-full
indicator
Working modes
Battery power