BorMann 035947, Manual, Page: 6 / 43

EN
WWW.BORMANNTOOLS.COM
6
Operating instructions
This section contains instructions that will be repeated throughout this manual.
Locking the Spray Gun:
Always lock the trigger off when attaching the spray tip or when the spray gun is not in use.
Spray Gun
The gun is locked when the trigger lock is at a 90º angle. (perpendicular to the trigger in
either direction).
To lock the gun, turn the trigger lock forward
and slightly down until it stops.
Plugging in the Sprayer
1. Check that the ON/OFF switch is in the OFF (O) position.
ON/OFF switch
2. Plug the power cord into a grounded outlet or heavy duty
grounded extension cord. Plug in the extension cord. Refer to Im-
portant Electrical Information.
Pressure Relief Procedure
Be sure to follow the Pressure Relief Procedure when shutting the unit off FOR ANY PURPOSE. This procedure is used to relieve pressure from the
spray hose.
1. Lock the spray gun off (see directions above).
Flip the ON/OFF switch to the OFF position.
2. Turn the PRIME/SPRAY knob to PRIME.
3. Unlock the spray gun and trigger
spray gun into the side of the material
bucket. Lock the spray gun.
ON/OFF switch