BorMann 030751, User Manual

Page: 5 / 16

EN
WWW.BORMANNTOOLS.COM
5
Make sure that the water tank is set properly.
Your dehumidifier will not be operated when the water tank is full of water or is not set properly.
How to remove
Pull the water tank gently towards you by holding the concave part of the tank.
How to set
Push the tank horizontally and gently. The handle lies down by itself.
Attaching an air cleaning filter (not included with all models)
1. Remove the filter holder from the back cover.
2. To set the air filter cover to the back cover:
Take the air filter out of polythelene bag, and put it onto the back filter. Set the air clean-
ing filter to the back cover with the filter fitted into the four catches in the cover.
Put the filter holder on the cover with the flat surface of the holder up, and set the hold-
er to the four catches in the cover (with the convex portions of the holder upward).
To set the holder securely, press its perimeter with fingers.
Then check the condition.
Washable nylon filter
(not included with all
models)
Carbon filter (not included with all models)
Convex