BorMann 023197, Owner'S Manual, Page: 4 / 12

4
www.BormannTools.com
Proper use
This machine is designed for heavy duty demolition and chiselling work using the appropriate chisel. The equipment is to be used
only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user / operator and not the manufacturer will
be liable for any damage or injuries of any kind caused as a result of this. Please note that our equipment has not been designed
for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or
industrial businesses or for equivalent purposes.
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior
notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in
the pages of the manual of the purchased product may also refer to other models of the manufacturer’s product range, with
similar features, other than the product you have purchased.
Sound and vibration
Sound and vibration values were measured in accordance with EN60745
LpA sound pressure level 88.6 dB (A)
KpA uncertainty 3dB
LWA sound power level 99.6 dB (A)
KWA uncertainty 3 dB
Chiselling
Total vibration values determined in accordance with EN60745
Vibration emission value ah = 18.863 m/s2
K uncertainty = 1.5 m/s2
Additional information for electric power tools
Warning!
The specified vibration value was established in accordance with a standardized testing method. It may change according to how
the electric equipment is used and may exceed the specified value in exceptional circumstances.
The specified vibration value can be used to compare the equipment with other electric power tools. The specified vibration value
can be used for initial assessment of a harmful effect.
Keep the noise emissions and vibrations to a minimum.
Only use appliances which are in perfect working order.
• Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
Residual risks
Even if you use this electric power tool in accordance with instructions, certain residual risks cannot be rules out. The following
hazards may arise in connection with the equipment’s construction and layout:
1. Lung damage if no suitable protective dust mask is used.
2. Damage to hearing if no suitable ear protection is used.
3. Health damage caused by hand-arm vibrations if the equipment is used over a prolonged period or is not properly guided and
maintained.
Technical Data
Voltage: 230V~50Hz
Rated power input: 1300W
Max. impact rate: 4100 bpm
Chuck: SDS MAX
Impact energy: 18J
Power cord length: 3m
Protection class: II /