BorMann 023197, Owner'S Manual, Page: 3 / 12

3
www.BormannTools.com
Safety instructions for hammers
•
Wear ear protectors with hammer drills (exposure to noise can cause hearing loss).
• Use auxiliary handles supplied with the tool (loss of control can cause personal injury).
• Avoid damage that can be caused by screws, nails and other elements in your work piece; remove them before you start
working.
• Always keep the cord away from moving parts of the tool.
• When you put away the tool, switch off the motor and ensure that all moving parts have come to a complete standstill.
•
Use completely unro1led and safe extension cords with a capacity of 16Amps.
•
In case of electrical or mechanical malfunction, immediately switch off the tool and disconnect the plug.
• CONSTRUCTOR can assure flawless functioning of the tool only when original accessories are used.
• Use only accessories with an allowable speed matching at least the highest no-load speed of the tool.
• This tool should not be used by underage people.
• Be careful not to drill or drive into areas where electrical wires may be contacted; always use auxiliary handle
• If the cord is damaged or cut through while working, do not touch the cord, but immediately disconnect the plug.
• Never use tool when cord is damaged; have it replaced by a qualified person.
•
Always check that the supply voltage is the same as the voltage indicated on the nameplate of the tool (tools with a rating of
230V or 240V can also be connected to a 220V supply).
•
If the drill bit becomes unexpectedly jammed (causing a sudden, dangerous reaction), immediately switch off the tool.
• Be aware of the forces that occur as a result of jamming (especially when drilling metals); always use auxiliary handle and take a
secure stance.
• Always disconnect plug from power source before making any adjustment or changing any accessory.
Safety instructions
When using the machine, always observe the enclosed safety instructions as well as the additional safety instructions.
The following symbols are used throughout this manual:
Denotes risk of personal injury or damage to the tool.
For your safety
• Please do not operate the tool under damp and dark working condition.
• Only when switch is OFF can you plug in. After using please pull out the plug.
•
Place the cord behind the tool while operating. Do not drag the tool with cord.
•
Hold the tool firmly with both hands while operating, and stand still.
• Pull out the plug when you don’t use the tool or make adjustment (such as changing tools, repairing, maintenance or
adjustment).
• Underage people are not allowed to use the tool.
• Keep the tool away from the reach of children.
• Please use the original parts.
Electrical safety
Always check that the power supply corresponds to the voltage on the rating plate.
Important
The equipment and packaging material are not toys. Do not let children play with plastic bags, foils or small parts. There is a
danger of swallowing or suffocating!
Only after reading the operation manual and following all instructions, can you operate the tool safely.
If the cord is damaged or broken when operating, do not touch the cord, but pull out the plug at once.
Always wear eye protection, gloves and shoes. Please wear hearing protection to prevent hearing damage.
Don’t expose the tool to rain.