7
www.BormannTools.com
Warning:
Always use the handsaver (Figure 8). Do not hold the
hook with your hand. This is important not only when reeling wire
rope in but also when removing wire rope from the winch under
power.
2. Run the winch intermittently to take up wire rope slack. When
using a pulley block, be sure the wire rope is running properly in
all pulleys before applying a load.
Warning: Do not re-engage clutch while winch is running.
Warning: Always operate winch with an unobstructed view of
the winching operation. Never obscure warning and instruction
labels.
Maintenance
1.
Periodically check the tightness of mounting bolts and electrical connections. Remove all dirt or corrosion and always keep
clean.
2.
Do not attempt to disassemble the gear box. Repairs should be done by the manufacturer or an authorized repair center.
3.
The gear box has been lubricated using a high temperature lithium grease and is sealed at the factory. No internal
lubrication is required.
Technical Data
Rated in pull:
3000lbs (1361kg) single line
Motor:
1.0kw/1.34hp 12V, permanent magnet
Gear reduction ratio: 153:1
Drum dimension:
Φ1.2"x2.8"(Φ30.5mm x 71.5mm)
Cable:
Φ3/16"x43’(Φ4.8mm x 13.5m)
Switch control lead:
3m
Battery cable:
1.83m
Overall dimension:
11.8"x4.1"x4.1"(300mm x 103.5mm x 106mm)
Mounting dimension:
Φ3/10"x3"(Φ8.5mm x 80mm)
Weight:
N.W/G.W: 19kg/20kg
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior
notice unless these changes significantly affect the performance and safety of the products. The parts described /
illustrated in the pages of the manual of the purchased product may also refer to other models of the manufacturer’s
product range, with similar features, other than the product you have purchased.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our
warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement
work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service
department of the manufacturer.
Summary of Contents for 018988
