BORK M782, User Manual

Page: 9 / 15

14 15
AUTOMATIC REVERSE FUNCTION
The AUTOMATIC REVERSE FUNCTION is enabled
automatically when there are difficulties with meat
transfer. This function not only eliminates the need
to carry out operations manually, but also reliably
protects the motor from breakage. The AUTOMATIC
REVERSE FUNCTION is enabled automatically
if the screw stops rotating during operation
of the meat grinder. The AUTOMATIC REVERSE
FUNCTION n is enabled one time.
The display will show the following: The meat grinder will stop operation and the display
will show the following information if the reason
for blockage is not eliminated after turning
the AUTOMATIC REVERSE FUNCTION on:
• Turn the switch to the position .
• Remove the nozzle by pressing the button
.
• Unscrew the lock of the stuffing grate
in the counter-clockwise direction.
• Disassemble and clean all removable parts.
ENERGY SAVING MODE
The meat grinder will automatically switch
to the energy-saving mode if its control means
are not activated within 3 minutes.
The display brightness will decrease and the display
will show the following information:
• Press the button or turn the switch
to any position in order to exit the power saving
mode.
LANGUAGE SELECTION
• Make sure that the switch is in the position
in order to select the necessary language.
• Press and hold the butto for 3 seconds.
• The display will show the current language.
• The selected language will be displayed each time
after button pressing:
– Russian;
– English;
– German;
– Italian.
• The device will save the selected language settings
automatically after 4 seconds.
CLEANING
• Prior to cleaning: disconnect the meat grinder
from mains (see the «Disassembly» section).
• Rinse all detachable parts thoroughly with running
water using a mild detergent. Rinse them with water
and wipe with a soft dry cloth.
• The outer part of the meat grinder body shall
be wiped with a damp cloth moistened with soapy
water and cleaned with a soft dry cloth.
• Use a special cleaning tool for faster and more
convenient cleaning of grates.
• After cleaning, it is necessary to grease blades
and grates with vegetable oil.
The blades and grates for stuffing shall be wiped
dry to prevent appearance of rust.
Do not wash the loading compartment
and removable parts in the dishwasher.
ANODIZED COATING CARE
Do not use tools with abrasive particles, citric acid,
hard sponges and wire brushes in the cleaning
process.
Chemically aggressive compounds,
alkaline detergents have a destructive effect
on the anodized surface.