BORK M782, User Manual

Page: 6 / 15

9
CONTROL PANEL
— launching of the reverse system
— turning the meat grinder off
— turning the meat grinder on
— button for nozzle removal
— speed selection /
language selection button
Prior to the first use, flush the screw blade, meat
nozzle, tray, grates and pusher in running water
and dry them.
ASSEMBLY
• The meat grinder shall be disconnected from mains.
• Install the screw into the nozzle of the meat grinder.
• Put the roll blade on the screw, placing cutting
edges outwards.
• Install the blade, placing cutting edges outwards.
• Install the grate on the screw: small, medium
or large, depending on the stuffing consistency
you want to achieve.
Make sure that the nozzle projection coincides
with the grate slot.
Tighten the stuffing grate in a clockwise direction.
Apply the SMART LOCK system in order to install
the assembly nozzle into the meat grinder, using
a single push procedure, until it issues a characteristic
click. Place the tray on top
of the nozzle assembly. Disassembly
Disconnect the meat grinder from mains before
disassembly.
Press the button
, in order to detach the nozzle
and remove the nozzle.
Unscrew the stuffing grate lock counter-clockwise
using a special tool.
Remove the blade, grate and screw.