background image

D

EN

41

Warning:

  Use  only  those  rinse  aid  materials 

which are allowed for use in the machine. As 
rinse aid residues left as a result of overflowing 
will create extremely high amounts of foam and 

thus reduce the washing performance, remove 
the excess amount of rinse aid by wiping it with 
a rag.

If you properly place your dishes into the ma-
chine,  you  will  be  using  it  in  the  best  way  in 
terms  of  energy  consumption,  washing  and 
drying performance.
There are two separate baskets for you to load 
your dishes into your machine. You can load into 
the lower basket such round and deep items as 
pots with long handles, pot lids, plates, salad 
plates, cutlery sets.
The  upper  basket  has  been  designed  for  tea 
plates, dessert plates, salad bowls, cups and 
glasses. When placing long-stem glasses and 
goblets,  lean  them  against  the  basket  edge, 
rack  or  glass  supporter  wire  and  not  against 
other items. Do not lean long glasses against 
one another or they cannot remain steady and 
may receive damage.

It is more appropriate to locate the thin narrow 
parts into the middle sections of baskets.
You can place spoons among the other cutlery 
sets in order to prevent them from sticking to
one another. You are recommended to use the 
cutlery grid in order to obtain the best result.
To  avoid  any  possible  injuries,  always  place 
such long-handle and sharp-pointed dishes as 
serving fork, bread knife etc. with their sharp 
points facing down or horizontally on the bas-
kets.

Warning:

 Place your dishes into your machine 

in  a  way  that  they  will  not  prevent  the  upper 
and lower spray arms from spinning.

Loading your dishwasher

Dish rack

There are dish racks on the upper basket of your machine. 

a b

 You can use these dish racks in 

open or closed position. When they are in open position 

a

 you can place your cups on them; and 

when in closed position 

b

 you can place long glasses on the basket. Also, you can use these racks 

by placing long forks, knives and spoons on them laterally.

Summary of Contents for M-system MVW-600





















































Reviews: