![background image](http://html.mh-extra.com/html/boretti/bpwk-45/bpwk-45_operating-instructions-manual_2788386023.webp)
21
GB
TEMPERATURE SETTING
For Single Zone
•
The temperature setting range is 5-22 ºC (41-72 ºF).
•
Directly touch the
or
mark to set the wine cooler temperature as you want.
• The
fi rst touch on
or
mark will recall the previous set temperature displayed in the digital
window. If the appliance runs after a power failure (or unplugging), the previous set temperature
does not exist and is replaced by the defaulted temperature at 12ºC.
•
Touch the mark
to increase the set temperature by 1ºC. On the contrary, touch the mark
to
decrease the set temperature by 1ºC.
• The digital will change to display the real temperature of the inside cabinet after
10 seconds
without being touched.
Note:
For the fi rst time to use the appliance or to restart the appliance after having been shut off for
a long time, you may fi nd a few degrees variance between the set temperature and the displayed
temperature. It is normal and everything of the appliance will be in the order after a few hours running
SELECTING FAHRENHEIT(ºF) & CELSIUS (ºC) DISPLAY
For Single Zone
Touch the marks
with 2 fi ngers at the same time and hold for 5 seconds, you can interchange
the Fahrenheit and Celsius display.
For Dual Zone
Directly touch the mark
, you can interchange the Fahrenheit and Celsius display for both zones at
the same time.
CARE AND MAINTENANCE
CLEANING THE WINE COOLER
•
Turn off the power, unplug the appliance, and remove all items.
•
Wipe the inside surfaces with a sponge and baking soda solution. The solution should be about 2
tablespoons of baking soda to a quart (approx. 1 litre) of warm water.
•
Wash the shelves with a mild detergent solution. Allow wooden shelves to dry.
•
Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical
parts.
• Wipe the outside cabinet with warm water and mild liquid detergent. Wipe dry with a clean soft
cloth.
• Do not use steel wool or steel brush on the stainless steel. These will contaminate the stainless
steel with steel particles and rusting may occur.
Summary of Contents for BPWK-45
Page 8: ...6 NL Fig 3 Fig 4 ...
Page 20: ...18 GB Fig 3 Fig 4 ...
Page 32: ...30 FR Fig 3 Fig 4 ...
Page 44: ...42 DE Abb 3 Abb 4 ...