![background image](http://html1.mh-extra.com/html/boretti/bikw-76/bikw-76_operating-instructions-manual_2788326064.webp)
64
What to do in case of a problem
The hob or the cooking zone doesn’t start-up :
• The hob is badly connected on the electrical network.
• The protection fuse cut-off.
• The looking function is activated.
• The sensitive keys are covered of grease or water.
• An object is put on a key.
The control panel displays [ U ]:
• There is no pan on the cooking zone.
• The pan is not compatible with induction.
• The bottom diameter of the pan is too small.
The control panel displays [ E ] :
• The electronic system is defective.
• Disconnect and replug the hob.
One or all cooking zone cut-off :
• The safety system functioned.
• You forgot to cut-off the cooking zone for a long time.
• One or more sensitive keys are covered.
• The pan is empty and its bottom overheated.
• The hob also has an automatic reduction of Booster level and breaking Automatic overheating
Continuous ventilation after cutting off the hob :
• This is not a failure, the fan continuous to protect the electronic device.
• The fan cooling stops automatically.
The automatic cooking system doesn’t start-up :
• The cooking zone is still hot [ H ].
• The highest Booster level is set [ 9 ].
The control panel displays [ L ] :
• Refer to the chapter control panel locking page.
The control panel displays [ U ] :
• Refer to the chapter “Keep warm“.
The control panel displays [ II ]:
• Refer to the chapter “Stop&Go“