28
• Start up / Stop the Power:
Action
Control panel
Display
Start up the Booster
Slide to the end of the “SLIDER”
[ P ]
Or press directly on the end of
the “SLIDER”
Stop the Booster
Slide on the “SLIDER“
[ 9 ] to [ 0 ]
• Start up / Stop Super Power:
Action
Control panel
Display
Start up the Booster
Slide to the end of the “SLIDER”
[ P ]
Or press directly on the end of
the “SLIDER”
Start up Double Booster
Re-press key [ P ]
[
and P ]
Stop the Double Booster
Slide on the “SLIDER“
[ P ] to [ 0 ]
Stop the Booster
Slide on the “SLIDER“
[ 9 ] to [ 0 ]
• Power management:
The hole cooking hob is equipped with a maximum of Power. When the Power function is activated,
and in order to exceed the maximum Booster, the electronic system orders to reduce automati-
cally the power level of an other heating zone. The display is blinking on [ 9 ] during a few seconds
and then shows the maximum of power allowed :
Heating zone selected
The other heating zone: (example: Booster level 9)
[ P ] is displayed
[ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone
Timer
The timer is able to be used simultaneous with all heating zones and this with different time set-
tings (from 0 to 999 minutes) for each heating zone.
• Setting and modification of the cooking time :
Action
Control panel
Display
Select the power level
slide on the “SLIDER“
[ 1 ] to [ P ]
Select theTimer
Press simultaneously key [ - ] and [ + ]
Timer display on
from the timer until the desired display is on
Decrease the time
Press key [ - ] from the timer
[ 60 ] to 59, 58...
Increase the time
Press key [ + ] from the timer
Time increase
After a few seconds, the [ min ] display stops with blinking.
The time is confirmed and the timer starts.
Summary of Contents for BIKP-90
