manualshive.com logo in svg

BOREAL LASER GasFinderAB, Operation Manual

Share
Download
BOREAL LASER GasFinderAB Operation Manual Download Page 8

viii

Boreal Laser Inc. 

  GasFinderAB Operation Manual 

                      July 17th 2017

Product Warranty

Boreal Laser Inc. provides a standard warranty with the 

GasFinderAB

. The warranty covers 

the 

GasFinderAB

 instrument plus spare parts ordered through Boreal Laser Inc.

For items covered by the standard warranty, Boreal Laser Inc. guarantees that during the 
fi rst 12 months following delivery, there will be no charges for parts or service required to 
correct:

Equipment breakdowns

• 

Equipment malfunctioning

• 

Repeated or recurring faults or errors in the system.

• 

Instrument shipping and/or travel expenses for on-site service will be charged at cost.

This warranty does not apply to situations where system performance has been compromised 
as a result of customer negligence or abuse or damage resulting from natural disasters.

Boreal Laser Inc. provides software upgrades and unlimited telephone and e-mail support
free of charge for the lifetime of the installation.
Extended warranty is available, see your Boreal Laser Inc. sales contact for information.

Procedure for returning the GasFinderAB

If the unit has to be returned for service or repair, please contact Boreal Laser Inc. for a return 
material authorization (RMA) number and form. An email will be sent containing complete 
instructions on how to package the unit and containing a shipping address. 
 

Tel:   +1 780 488 5173
Fax: +1 780 488 0780

Email:[email protected]

Summary of Contents for GasFinderAB

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands