manualshive.com logo in svg

BOREAL LASER GasFinderAB, Operation Manual

Share
Download
BOREAL LASER GasFinderAB Operation Manual Download Page 12

1.4

Boreal Laser Inc. 

   GasFinderAB Operation Manual — System Description 

         July 17th 2017

Labels

Safety Concerns

Boreal Laser’s 

GasFinderAB

 contains an infrared laser which conforms to Class 1 as per 

IEC 60825-1 and is eye-safe. It does not require the use of protective eye wear, protective 
equipment, or outdoor control measures. There is no optical ignition hazard presented by 
lasers of this type.
There are no user serviceable components contained in apparatus, all units must be returned 
to factory for repair.

Caution: The infrared and red laser output from the GasFinder3-OP have very low power (conforms 
to Class 1 as per IEC 60825-1) and will not damage eye tissue. 
However, it is the recommendation of Boreal Laser Inc. that, as with ANY LASER SYSTEM, the user/ 
operator should avoid staring directly into the output aperture of the instrument. 
Note that the laser beam is infra-red and is not visible to the eye.

This label is fi xed to the top of the 

GasFinderAB

 and gives the 

instrument serial number and manufacturing date.

This label is fi xed to the rear of the 

GasFinderAB

 adjoining the power 

socket.

This Caution label is fi xed to the front of the 

GasFinderAB

.

Accessories

GPS

• 

  

 

Various.

Computer

• 

 

Any modern laptop will run the program required for airborne operation.

This label is fi xed to the top of the 

GasFinderAB

 and gives the 

time for the next recommended service.

Summary of Contents for GasFinderAB

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands