83
Installation
www.bora.com
EN
9.4
Installation dimensions
592+8
≥564
560+8
3
>30
2
>30
>30
>30
1
Fig. 9.1
Fitted unit
[1]
Minimum distance of 30 mm
[2]
Unobstructed ventilation cross-section of at least
160 cm²
[3]
Back panel of unit
i
The minimum appliance installation depth
is 564 mm. When using a 560 mm deep
standard unit, you should allow for clearance
from the wall. This generally depends on the
specific installation and/or the number of
BORA X BO frame spacers used
(see “9.5 BORA X BO frame spacer”).
X
Prepare the fitted unit taking
into account the dimensions specified.
X
Remove the back panel of the unit [3] to the rear
of the appliance.
X
Maintain a minimum distance of 30 mm [1] from
the back panel of the unit and the shelves to the
Checking the scope of delivery
X
Make sure the delivery is complete and check it
for damage.
X
If there are any missing or damaged parts, please
notify the BORA After Sales Service immediately.
X
Do not under any circumstances install parts
which are damaged.
X
Dispose of transport packaging in the proper
manner (see the “Decommissioning, disassembly
and disposal” chapter).
9.3
Tools and aids
The following tools are required to correctly install
the appliance:
O
Spirit level
O
4 mm Allen key
O
Slotted screwdriver
O
Water pump pliers
i
All installation work must be carried out using
hand tools. If electrical tools are used, there
is a risk of exceeding the tightening torque.
