bora Pro PKT3, Operating And Installation Instructions, Page: 20 / 32

EN
20
Installation
www.bora.com
[1] Cooktop
[2] Rear cooking zone (zone 1)
[3] Front cooking zone (zone 2)
[4] Rear cooking zone control knob (zone 1)
[5] Front cooking zone control knob (zone 2)
X
X
Connect the port on the back of the left control knob [5] to
the “zone 2” port on the cooktop [1].
X
X
Connect the port on the back of the right control knob [4] to
the “zone 1” port on the cooktop [1].
X
X
Using the configuration menu, set the correct allocation of the
cooking zones in the control knob display (see configuration
menu – 0° or 180° installation).
5.8.2 Establishing contact between the
cooktop extractor and cooktops
2
ZONE1 INTERF. COM1 ZONE2
1
ZONE1 INTERF. COM1 ZONE2
3
Fig. 5.23
Establishing contact between the cooktop extractor
and cooktops
[1] Cooktop extractor communication cable ports (x 2)
[2] Cooktop communication cable port
[3] Ribbon cable
X
X
Using the communication ports provided, connect the
cooktop extractor [1] to the cooktop or cooktops [2].
X
X
Only use the cables supplied in the scope of delivery.
i
The full range of functions on the appliances will only
be available if the cooktop extractor and cooktops are
connected correctly.
5.8.3 Connecting the power supply
X
X
Observe all national and regional laws and regulations as well as
the supplementary regulations of the local utility companies.
i
The appliances may only be connected to the mains power
supply by certified specialists. The specialist also assumes
responsibility for the proper installation and commissioning.
5 4
3
2
1
Fig. 5.21
Standard connection of appliances that connect at
the rear (PKT3)
[1] Cooktop
[2] Rear cooking zone (zone 2)
[3] Front cooking zone (zone 1)
[4]
Rear cooking zone control knob (zone 2)
[5]
Front cooking zone control knob (zone 1)
X
X
Connect the port on the back of the left control knob [5] to
the “zone 1” port on the cooktop [1].
X
X
Connect the port on the back of the right control knob [4] to
the “zone 2” port on the cooktop [1].
Connecting the cooking zones when the cooktop is
installed rotated by 180°
5 4
3
2
1
Fig. 5.22 Connecting the cooking zones when the cooktop is
installed rotated by 180° and the ports are on the
rear of the appliance (PKT3)