9. Do not expose to rain or use in damp locations.
10. Do not abuse the cord. Never use the cord to carry the tools or pull the plug
from an outlet. Keep cord away from heat, oil, sharp edges or moving parts.
Replace damaged cords immediately. Damaged cords increase the risk of electric
shock.
Personal Safety
11. Know your power tool. Read this manual carefully to learn your power tool’s
applications and limitations as well as potential hazards associated with this type of
tool.
12. Stay alert, watch what you are doing, and use common sense when operating a
power tool. Do not use tool while tired or under the influence of drugs, alcohol,
or medication. A moment of inattention while operating power tools may result in
serious personal injury.
13. Dress properly. Do not wear loose clothing or jewelry. Wear a protective hair covering
to contain long hair. These may be caught in moving parts. When working outdoors,
wear rubber gloves and insulated non-skid footwear. Keep hands and gloves away
from moving parts.
14. Reduce the risk of unintentional starting. Be sure your tool is turned off before
plugging it in. Do not use a tool if the power switch does not turn the tool on and off.
Do not carry a plugged-in tool with your finger on the switch.
15. Remove all adjusting keys and wrenches. Make a habit of checking that adjusting
keys, wrenches, etc. are removed from the tool before turning it on.
16. Do not overreach. Maintain control. Keep proper footing and balance at all times.
17. Use safety equipment. Everyone in the work area should wear safety goggles
or glasses with side shields complying with current safety standards. Everyday
eyeglasses only have impact resistant lenses. They are not safety glasses. Wear
hearing protection during use and a dust mask. Hard hats, face shields, safety shoes,
etc. should be used when specified or necessary.Keep a fire extinguisher nearby.
18. Keep guards in place and in working order.
19. Never stand on tool. Serious injury could occur if the tool is tipped or if the cutting
tool is tipped or if the cutting tool is unintentionally contacted.
20. Keep hands away from all cutting edges and moving parts.
Tool Use and Care
21. Secure work. Use clamps or a vise to hold work when practical. It is safer than using
your hand and it frees both hands to operate the tool.
22. Do not force tool. Your tool will perform best at the rate for which it was designed.
Excessive force only causes operator fatigue, increased wear and reduced control.
4
