EN
27
Functions and operation
www.bora.com
X
O
Once the remaining time is less than 5 seconds, the remaining
time flashes.
Changing active timers
X
X
Repeat the steps for cooking zones with an active timer (see
“Activating cooking zone timers”).
X
X
Change the set time and restart the timer.
Switching the timer off early
If the cooking session is to be continued:
X
X
open the cooktop function menu;
X
X
select the menu item “timer function (automatic cut-off)”;
X
X
decrease the set time to
000
and confirm the entry.
X
O
The timer is deactivated early and an acoustic signal is heard.
X
O
Active cooking sessions are resumed unchanged.
If the cooking session is to be ended:
X
X
turn the knob ring to power level
0
X
O
An acoustic signal sounds and the cooking zone is switched off.
Time lapsed
X
O
The cooking zone switches off automatically.
X
O
An acoustic signal is heard.
X
O
0 0 0
and the timer symbol can be seen flashing in the
control knob display.
X
O
After 5 seconds the acoustic signal and the flashing display
are automatically deactivated.
i
The flashing display and acoustic signal can be stopped
early with a touch command on the control knob.
X
O
If necessary, the residual heat indicator
H
is then displayed.
6.4.4 Automatic heat up function
When the automatic heat up function is activated, the cooking
zone works at full power for a certain time and is then
automatically reset to the previously set level.
The system automatically determines the heating time
depending on the power level set.
PKCH3
Power level
(continuous cooking level)
Cooking times in
min:sec
1
01:00
2
03:00
3
04:48
4
06:30
5
08:30
6
02:30
7
03:30
8
04:30
Tab. 6.4
Overview of heating times
i
If the cooking zone power level is increased while the
automatic heat up function is active, the automatic heat
up function remains active. The heating time is adjusted
accordingly.
i
If the cooking zone power level is decreased while the
automatic heat up function is active, the automatic heat
up function is deactivated.
Requirement for the automatic heat up function:
X
O
cooking session with a power level between 1 and 8.
Activating the automatic heat up function
X
X
Open the cooktop function menu.
X
X
Do the following:
1
2
3
4
Fig. 6.17
Activating the automatic heat up function
X
O
An acoustic signal is heard, the automatic heat up function is
activated and the corresponding timer counts down.
X
O
The heat-up symbol
A
and the set power level are shown in
the control knob display (e.g.
A 5
).
Deactivating the automatic heat up function early
The activated automatic heat up function will end prematurely if
you
X
X
reduce the power level (continuous cooking level);
X
X
set the power level
9
;
X
X
activate the power setting
ßp
;
X
X
activate the heat retention level
v
;
X
X
switch off the cooktop.
Time lapsed
X
O
When the heat up time has lapsed, the previously set
continuous cooking level will be activated.
X
O
An acoustic signal is heard.
X
O
The heat up symbol will no longer be displayed
Summary of Contents for PKCH3
Page 33: ...EN 33 Notes www bora com 11 Notes...
Page 34: ...EN 34 Notes www bora com...
Page 35: ...EN 35 Notes www bora com...
