EN
24
Functions and operation
www.bora.com
Increasing the power level
X
X
Turn the knob ring clockwise
Reducing the power level
X
X
Turn the knob ring anticlockwise
6.3.3 Cooktop power setting
When the power setting is activated, maximum cooking zone
power is available for a predefined time.
i
Never heat up oil, fat and the like on this power setting.
The bottom of the pan can overheat due to the high
power output.
i
On the cooktop PKCH3 the power setting corresponds to
the Hyper setting.
Activating the power setting for a cooking zone
X
X
Turn the knob ring clockwise to power setting
P
.
i
After 10 minutes, the power setting is automatically
switched back to power level 9.
Deactivating the power setting early
X
O
Setting another power level for the cooking zone with the
power setting active
6.4 Function menu
i
Every appliance offers different additional functions.
These can be selected and activated via a function menu.
Only the functions available for each type of appliance
are shown in the corresponding function menu.
Function menu on Hyper and HiLight cooktops
A total of 4 additional functions are available on HiLight and
Hyper cooktops (cooktops with radiant heating elements):
Menu item
Description
1
o
Additional ring switching
2
v
Heat retention function (3 levels)
3
t
Timer function (automatic cut-off)
4
A
Automatic heat up function
Tab. 6.2
Function menu on Hyper and HiLight cooktops
Calling up the function menu
Fig. 6.8
Accessing a cooktop function menu
i
If all connected appliances are switched off (= power
level 0), the whole system is automatically switched off
after 10 seconds.
The cooktop was switched on
X
O
H
is shown in the control knob display for previously active
and still hot cooking zones (residual heat indicator).
X
O
If there is no longer any residual heat, the display will switch
off after 10 seconds.
6.3 Operating the cooktops
i
The full range of functions is only available for BORA
Professional 3.0 system cooktops in combination with the
cooktop extractors PKA3/PKA3AB and PKAS3/PKAS3AB.
i
Clean the cooking zones before using the cooktop for the
first time (see the Cleaning chapter).
6.3.1 General operating instructions for cooktops
Cooktops are operated with 2 control knobs.
There are 9 power levels, an optional power setting and various
functions available for each cooking zone.
Each cooking zone has its own control knob. The front cooking
zone is controlled using the left-hand knob and the rear cooking
zone with the right-hand knob.
1
2
Fig. 6.6
Cooking zone indicator
[1]
active front cooking zone
[2]
active rear cooking zone
6.3.2 Setting cooking zone power levels
The power levels are controlled by turning the knob ring to the
desired power level (electronic power adjustment).
Fig. 6.7
Setting cooking zone power levels
X
O
The selected power level is shown in the power display on the
control knob that has been touched.
Summary of Contents for PKCH3
Page 33: ...EN 33 Notes www bora com 11 Notes...
Page 34: ...EN 34 Notes www bora com...
Page 35: ...EN 35 Notes www bora com...
