bora CIW1, Operating And Installation Instructions

Page: 23 / 28

EN
23
Troubleshooting
www.bora.com
8 Troubleshooting
Observe all safety and warning information (see the Safety chapter).
Operating situation Cause Remedy
The cooktop cannot be switched on. The fuse or the automatic circuit breaker
of the electrical installation of the
apartment and/or house is defective.
Replace the fuse.
Switch the safety cut-out back on.
The fuse or the automatic circuit
breaker trips several times.
Call BORA After Sales Service.
The power supply is disconnected. Have a specialist electrician inspect
the power supply.
Odours and vapours arise when the
new cooktop is put into operation.
This is normal on brand-new
appliances.
Wait a few operating hours.
Contact After Sales Service if the
odour persists.
V
is displayed in the cooking zone
indicator.
No or unsuitable cookware has been
placed on the cooking zone.
Only use suitable cookware.
Select the cookware size
depending on the cooking zone
(see the Device Description chapter).
L
is displayed in the cooking zone
indicator.
The child safety lock is activated. Switch off the childproofing feature
(see the Operation chapter).
/ is displayed in the cooking zone
indicator.
Press and hold one or more buttons. Clean the operating panel or remove
objects (see the Device description
chapter).
E is displayed in the cooking zone
indicator.
The associated cooking zone or a
power element is defective.
Note down the error number and
contact BORA After Sales Service.
A cooking zone or the entire cooktop
switches off automatically.
The operating time of a cooking zone
has been exceeded.
Put the cooking zone back into
operation (see the Operation chapter).
The overheat protection has tripped. (see the Device Description chapter)
The power setting is automatically
shut off prematurely.
The overheat protection has tripped. (see the Device Description chapter)
The cooling fan continues running
after the cooktop has been switched
off.
The fan will continue to run until the
cooktop has cooled down and will then
switch off automatically.
Wait until the cooling fan switches off
automatically.
Tab. 8.1: Resolving a fault
X X
In all other instances, call BORA After Sales Service (see the Warranty, After Sales and Spare parts chapter).