background image

EN

24

Decommissioning, disassembly and disposal

www.bora.com

9  Decommissioning, dis-

assembly and disposal

X

X

Observe all safety and warning information  

(see Safety chapter).

X

X

Follow the enclosed manufacturer's information.

9.1  Decommissioning

Decommissioning is considered the final decommissioning  

and disassembly. After decommissioning, the device can 

either be built into another piece of furniture, sold on  

privately, or disposed of.

INFO 

Disconnecting and connecting the electricity 

and gas connection may only be carried out by 

certified experts.

X

X

Switch off the device before decommissioning  

(see Operating chapter)

X

X

Disconnect the device from the voltage supply.

9.2  Disassembly

The removal requires that the device is accessible for  

disassembly and was separated from the voltage supply 

(see Section 9.1). On gas-powered devices, make sure that 

the gas connection is complete.

X

X

Undo the mounting brackets.

X

X

Remove the silicone joints.

X

X

Remove the device from the worktop upwards.

X

X

Remove further accessory parts.

X

X

Remove the old appliance and dirty accessory as 

described under 9.3.

9.3  Disposing of the product in an 

environmentally friendly way

Disposal of transport packaging

INFO 

The packaging protects the device against 

transport damages. The packaging is made 

of materials that are environmentally friendly 

and easy to dispose of and can therefore be 

recycled.

Returning the packaging material into the material cycle 

saves resources and reduces the waste production. Your 

specialist supplier will take the packaging back.

X

X

Hand the packaging to your specialist supplier

or

X

X

Dispose of the packaging properly taking into account 

the regional regulations.

Disposing of the old appliance

Electrical devices marked with this  

symbol should not be disposed of as 

household waste at the end of its life. 

They must be taken to a collection  

centre for recycling electrical or  

electronic non-heating appliances.  

For information, please contact your 

city or local authorities.

Waste electric and electronic equipment often still  

contains valuable materials. They do, however, also 

contain harmful substances that were required for their 

correct functioning and safety. When disposed of in the 

residual waste or if not handled correctly, they may cause 

harm to the health of people and the environment.

X

X

Therefore do not dispose of your old appliance as 

household waste.

X

X

Take the old appliance to a regional collection centre 

for return and recycling of electronic and electrical 

parts and other materials.

Summary of Contents for CIW1





























Reviews: