4
•
Place the EXL651 into the cabinet with the rubber bump-stops to the rear, aligning the
left side to the left side of the cabinet. Push in until the bump stops contact the rear of
the cabinet. The exhaust grill on the bottom of the machine will now align with the cut-
out in the base of the cabinet.
•
Place a suitable container under the bath overflow, a small plastic bottle is provided
for this purpose.
•
Fill the bath with cold water through the opening on the top of the machine until water
is displaced from the over flow.
•
Connect power to the machine and switch on. The fan and compressor will start, and
the machine will start to cool down.
•
The machine can now be connected to the other components of the water system, and
once a full ice bank is produced, the fans and compressor will switch off, and the
machine is ready for use.
Installation and Commissioning
