OPERATING INSTRUCTIONS
Used as an Emergency Jump Starter
Note: For optimum performance, do not store your Booster PAC below 50° when
using as a jump starter. Never charge or jump start a frozen battery.
1. Use in a well ventilated area.
2. Shield eyes. Always wear protective eyewear when working near batteries.
3. Review this instruction manual and the instruction/safety manual provided by
the manufacturer of the vehicle being jump started.
4. Turn ignition off before making cable connections.
5. Clamp the positive (red +) clamp to the positive terminal on the vehicle battery
(for negative ground system), or an alternate vehicle starting point as
recommended by vehicle manufacturer.
6. Clamp the negative (black –) clamp to the vehicle frame (ground).
7. Make sure the cables are not in the path of moving engine parts (belts, fans,
etc.).
8. Stay clear of batteries while jump starting.
9. Start the vehicle (turn on the vehicle ignition).
Note: If the vehicle doesn’t start within 6 seconds, let the Booster PAC cool for
3 minutes before attempting to start the vehicle again or you may damage the
Booster PAC.
10. When the vehicle is started, disconnect the negative (–) battery clamp from the
vehicle frame and return it to its holster.
11. Disconnect the positive (+) clamp and return it to it’s holster.
Used as an Alternative Power Supply for Vehicles
Your Booster PAC is an essential tool for all who replace automobile batteries.
Most vehicles have electronic components with memory, such as alarm systems,
computers, radios, phones, etc. and when the vehicle’s battery is replaced, the
memory is lost. However, if the power extension cord is plugged from the Booster
PAC to the 12 Volt outlet on the vehicle, the memories can be saved.
Note: To use the Booster PAC for this purpose, the chosen outlet must be live when
the vehicle is turned OFF. On some vehicles, 12 Volt outlets are deactivated when the
vehicle is turned OFF.
Used as a Multipurpose Power Supply
Your Booster PAC is also a portable power source for all 12 Vdc accessories equipped
with a male 12 Volt plug. The DC outlet on the Booster PAC has automatic overload
protection.
When your Booster PAC is used with a DC to AC power inverter, it can operate
appliances normally powered by 120 Vac or 220 Vac. Recommended inverter for the
portable power source is 300 watts maximum. For more information, contact your
nearest Booster PAC dealer.
