6
2. PACKAGING DISPOSAL:
Take the paper, cardboard and corrugated board to the appro-
priate waste collection centres. Plastic material must be placed
in the relevant collection containers.
The symbols indicating the various types of plastic are:
Key for the different types of plastic materials:
PET
= Polyethylene terephtalate •
PE
= Polyethylene, code 02
for PE-HD, 04 for PE-LD •
PVC
=Polyvinyl chloride •
PP
=
Polypropylene •
PS
= Polystyrene, Polystyrene foam •
O
= Other
polymers (ABS, Laminates, etc.)
3. DISPOSING OF ELECTRICAL APPLIANCES
The wheelie bin symbol with a cross indicates
that the product must not be disposed of in the
domestic waste at the end of its useful life.
Instead, it should be taken to your nearest desi-
gnated collection point or recycling facility.
Alternatively, check with your retailer and return the product
when buying a replacement, on a one-to-one basis or as free of
charge in case the size is smaller than 25 cm. Appropriate
disposal promotes the recycling of parts and materials, as well
as helping to protect the environment and human health.
Under current legislation, strict penalties are enforced against
those disposing of products illegally. For more information
about the collection of special waste, contact your Local
Authority.
SWITCHING ON/OFF
To switch on the instrument move selector
k
to
ON
. To
switch off move the same selector to
OFF
.
DEMOSONGS
This keyboard has
22 demosongs
. To choose the pre-
recorded tracks, press the
DEMO ONE
key
i
in suc-
cession. Press
DEMO ALL
j
, to listen to the 22 demo-
songs in sequence.
Press
STOP
n
to interrupt.
VOLUME CONTROL
Adjust volume to desired level by using the
VOLUME
button to increase or
VOLUME –
to reduce
b
.
SOUND SELECTIONS
You can select one of the
4 sounds
by pressing the
related button
e
.
MAINS SUPPLY
The instrument can be powered by a mains adaptor (not
included) with the following characteristics in output:
VDC = 5V; I = 500 mA
(positive central
terminal). Insert the jack in the DC socket
g
.
WARNING: The transformer, power supply used with the electric toy shall be regularly
examined for damage to the supply cord, plug, enclosure or other parts, and in the
event of damage, it shall not be used until the damage has been repaired.
• the transformer or power supply is not a toy.
• Make sure the toy is disconnected from the power supply unit before cleaning it.
• the toy shall only be used with a transformer for toys or a power supply for toys.
This toy is only to be connected to equipment bearing either of
the following symbols.
NOTE: Rating plate information was located at bottom enclosure of the apparatus.
BATTERY SUPPLY
Use a screwdriver to
open the battery
compartment. Insert
4 x 1.5 V batteries
R6/AA (not
supplied), ensuring
correct polarity
(+/–)
.
Re-fit battery cover.
Replace batteries when the quality of sound becomes
bad.
Use alkaline batteries to obtain a longer
duration
.
ATTENTION – BATTERY CARE
• Non-rechargeable batteries are not to be recharged. •
Rechargeable batteries must be removed from the toy before
being charged. • Rechargeable batteries are only to be charged
under adult supervision. • Different types of batteries or new
and old batteries are not to be mixed. • Use only batteries of the
same or equivalent type. • Batteries are to be inserted with
correct polarity. • Remove exhausted batteries to prevent lea-
kage. • Do not short-circuit supply terminals. • Remove batteri-
es during long periods of non-use.
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items mentioned
here below, please refer to Council Administration office regar-
ding specialised waste collection centres.
1. DISPOSAL OF BATTERIES:
Protect the environment by disposing of
batteries in the special containers provided
for this use.
01
PET
02
PE
03
PVC
05
PP
06
PS
07
O
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
E N G L I S H
Summary of Contents for Toy Band Star 10 3000
Page 58: ...56...
