1
SWITCHING ON/OFF
To switch on the instrument move selector
a
to ON. To
switch the instrument off move the same selector to
OFF.
DEMOSONGS
This keyboard has 24 demosongs.
Press DEMO ONE
e
, to listen to one of the eight
demosongs.
Press DEMO ALL
h
, to listen to the demosongs in
sequence. Press STOP
c
to interrupt.
Press the TEMPO button
g
to increase or reduce the
demosong speed.
VOLUME CONTROL
Adjust volume to desired level by using the VOLUME
button
f
.
SOUNDS SELECTION
You can select one of the 2 sounds by pressing the
SOUNDS button
d
.
USING THE USB FLASH DRIVE
This keyboard enables you to read MP3 songs on a USB
Flash drive (Pen Drive) when it is connected to a USB
port at the back of the instrument
k
.
After connecting the device, the first song will automati-
cally start playing and will be heard from the speakers on
the keyboard. To adjust the volume, keep the USB VOL
button pressed (
or
)
i
; to pause the song, press
PAUSE or PLAY; to go to the
next or previous song, press
USB VOL (
or
).
MICROPHONE
To use
condenser
microphone (not supplied), insert the
jack in the MIC socket
j
.
MUSICAL NOTES INDICATORS
On the front of the instrument, there is a coloured label
b
with indication of numbers next to each button in
order to facilitate the recognition of musical notes
according to the BONTEMPI method.
There are some songs written with the Bontempi method
on the back of the box, while others can be downloaded
from the website www.bontempi.com
POWER SUPPLY
Use a screwdriver to open
the battery compartment.
Insert 4 x 1.5 V batteries
R6/AA (not supplied),
ensuring correct polarity.
Re-fit battery cover.
Replace batteries when the quality of sound becomes
bad. Use alkaline batteries to obtain a longer duration.
ATTENTION - BATTERY CARE:
Non-rechargeable batteries are NOT to be recharged. • Rechargeable batteries
must be removed from the product before being charged. • Rechargeable
batteries are only to be charged under adult supervision. • Different types of
batteries or new and old batteries are not to be mixed. • Use only batteries of
the same or equivalent type. • Batteries are to be inserted with correct
polarity. • Remove exhausted batteries to prevent leakage. • Do not short
circuit supply terminals. • Remove batteries during long periods of non-use.
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items mentioned here below,
please refer to Council Administration office regarding specialised waste
collection centres.
1. DISPOSAL OF BATTERIES: Protect the environment
by disposing of batteries in the special containers
provided for this use.
2. PACKAGING DISPOSAL: Take the paper, cardboard and corrugated board to
the appropriate waste collection centres. Plastic material must be placed in
the relevant collection containers.
The symbols indicating the various types of plastic are:
Key for the different types of plastic materials:
PET
= Polyethylene terephtalate •
PE
= Polyethylene, code 02 for PE-HD, 04
for PE-LD •
PVC
=Polyvinyl chloride •
PP
= Polypropylene •
PS
= Polystyrene,
Polystyrene foam •
O
= Other polymers (ABS, Laminates, etc.)
3. DISPOSING OF ELECTRICAL APPLIANCES: The wheelie bin
symbol with a cross indicates that the product must not be
disposed of in the domestic waste at the end of its useful life.
Instead, it should be taken to your nearest designated collection
point or recycling facility. Alternatively, check with your retailer
and return the product when buying a replacement, on a one-to-one basis or
as free of charge in case the size is smaller than 25 cm. Appropriate disposal
promotes the recycling of parts and materials, as well as helping to protect
the environment and human health. Under current legislation, strict
penalties are enforced against those disposing of products illegally. For more
information about the collection of special waste, contact your Local
Authority.
E N G L I S H
01
PET
02
PE
03
PVC
05
PP
06
PS
07
O
4
5 6
7 8
3
9
