background image

                             

 

 

 

Placing the shredder 

 

1. 

Place the device on a smooth flat surface. 

2. Ensure the device is positioned at a distance from heaters and other sources of heat. 

3. Where possible, avoid using extension cables or multi-way sockets. It is advisable to connect the device 

directly to the wall socket using the power cable (in accordance with the technical specifications). 

4. Plug the power cable into a standard 120-volt AC outlet. 

 

Operating the shredder

   

 

A main switch is located on the back of the machine, while a slide switch is on the top of the device and can be 

set in three (3) positions. 

 

1. 

AUTO

when the device is connected to power, and the main switch on the back of the machine is on, the 

power light will be blue. The cutting process is automatically initiated as soon as paper or credit card is 

inserted into the corresponding feed slot. Please do not insert any credit cards into the feed slot while 

shredding paper since the device is incapable of shredding of paper at the same time as credit cards. Once 

the chosen material has fully passed through the cutting unit, the cutting process will stop automatically. 

 

2. 

REV

 

is used to fix paper blockages. This changes the cutting direction before an operating cycle has ended 

enabling the blades to be released. If you realise that you have unintentionally inserted too much paper, and 

the shredding process becomes noticeably slower, set the switch to this position to remove excess paper. 

 

3. 

FWD:

 The cutting mechanism runs forwards for a few seconds and shreds the material fed in. 

 

The device is only intended for indoor use and for an intermittent operation period of a maximum 

of 20 minutes. Do not use the shredder for commercial purposes or outdoors. 

 

 

Shredder capacity 

 

The C222-A is capable of shredding up to 20 sheets of paper (DIN A4, 75g/m²) into cross cut at once. Paper width 

may not exceed 220mm. When shredding small pieces of paper, such as envelopes or credit card receipts, the 

paper should be inserted in the middle of the slot. Please ensure that you never insert more than the stated 

maximum quantity into the cutting unit as this may damage the device. 

 

The C222-B is capable of shredding up to 16 sheets of paper (DIN A4, 75g/m²) into

 

micro cut at once. Paper 

width may not exceed 220mm. When shredding small pieces of paper, such as envelopes or credit card receipts, 

the paper should be inserted in the middle of the slot. Please ensure that you never insert more than the stated 

maximum quantity into the cutting unit as this may damage the device. 

 

Start operating 

 

After connecting power, turn on the main switch, touch the switch on the top housing to

 “AUTO”

, the device will 

then be ready to use. 

 

Shredding paper 

 

Insert several sheets of paper (75g/m²) in portrait orientation into the feed slot. The paper will be detected by the 

sensors, the cutting unit will start and the paper will be automatically drawn in. The operation will finish once there 

is no more paper in the cutting unit. 

 

 

 

 

Summary of Contents for C222-A









Reviews: