manualshive.com logo in svg

Bonnet S200B11, Installation Manual, Page: 14 / 22

Share
Download
Bonnet S200B11 Installation Manual Download Page 14

n° 6BE648285NI-0606 – 

Page 12

3.  INSTALLATION

3.1  GENERAL REQUIREMENTS

The installation, any repairs or alterations to this equipment should be undertaken by

qualified specialists.

3.2  HANDLING

The appliance should be moved with specialist lifting gear.
If the unit must be transported it should be on its original pallet and should under no

circumstances be stacked.

3.3  UNPACKING AND LOCATING

3.3.1  UNPACKING

After cutting the banding lift the parts off and identify them from the packing note.
The refrigerated platform is delivered pre connected to the control panel.

3.3.2  LOCATING

Once a location has been chosen ensure that the air around the unit is sufficient to

provide adequate cooling to the condenser and compressor

Allow a 5 to 10cm clearance around the unit.
Avoid proximity to any heat source.

Model shown: 2x1C GI cabinet with 2 doors

Refrigerated platform

Box or accessories

Door frame and door

Back panels

Side panels

Control panel

Wooden pallet

Summary of Contents for S200B11























Reviews:

No comments