Assembly
A
B
Electrical connection of mains and motor
D1
D2
Operating via operator panel
Operating via control signals
Connect
- switch for enable signal
- switches for drive-starting and reversal of rotation
- potentiometer for speed control
Setup via operator panel. Refer to section “Setup
via operator panel”.
Start drive via key of operator panel.
Commissioning
Connect switch for enable signal
Start drive via control signals.
Setup via operator panel. Refer to
section “Setup via operator panel”.
E
E
,
Before putting the frequency inverter into operation all covers of the device must be assembled.
C
D
7
Start drive via control signals
,
After Setup switch on start signals on X11.4 (start
clockwise) or X11.5 (start anticlockwise).
The drive is accelerated to 3.50 Hz (default value
of P418).
Start drive via key of operator panel
,
,
,
After Setup select function Motorpoti (menu
/
, refer to section “Menus and
functions”).
Press RUN.
The drive is accelerated to 3.50 Hz (default
value of P418).
Press the arrow keys to vary the speed.
Local Poti F
,
,
In case of errors refer to section “Error messages and warnings”.
In case of wrong direction of rotation exchange two motor phases (e.g. U and V).
!
Warning!
,
Switch off power supply before connecting or disconnecting terminals.
Note
For the default functions of all control terminals refer to section Functions of control terminals
“
”.
1.5 mm
2
max. 2.5 mm
2
D1
4
2 3
3
1
3 4 5
24
VDC
out
ST
OA
0..10V
Start
clockwise
Start
anticlockwise
GND
10
VDC
X11
X12
X13
Enable
Speed
Start
ST
OB
D2
X12
X13
3
Enable
1
3
X11
24
VDC
out
ST
OA
ST
OB
!
X13
X12
X11
GB
Summary of Contents for Agile AGL 401-05
Page 1: ......
