Installation manual Bondtech Raise3D V2.0
10
•
Install the cable chain, use
the old screws (2mm hex
wrench).
•
If you have the Raise3D
machine with SILVER
MOTORS, use the
supplied adapter to
connect the motors and
follow the guide below.
Scroll down 4 pictures to
find the guide for the
BLACK MOTORS.
SILVER MOTOR
•
Connect the cable marked
with “L” to the front motor.
Use the adapter that has
wires reversed
, “L”.
•
Connect the cable marked
with
“R” to the rear motor.
Use the adapter that has
straight wires
, “R”.
