10. MAINTENANCE MANUAL OF THE SNOW BLADE
The maintenance is an essential condition to get the best safety performances of
the
Snow Blade
, therefore it must be made regularly. Each component of the
Snow Blade
that may be damaged or malfunctioning must be replaced or rebuilt.
For spare part replacement get in touch with Company Bonatti, as the use of non
original spare parts may endanger the functionality of the
Snow Blade
and cause
irreparable damages to things and persons.
10.1. MAINTENANCE FOR DEAD PERIOD AND/OR STORAGE
In case of dead period and/or storage of the machine:
wash the Snow Blade accurately;
lubricate all unpainted parts, slits, sliding flanges and guides;
lubricate all grease niples;
store in a dry place.
10.2 LUBRICATION OF THE SNOW BLADE COMPONENTS
COMPONENT
OPERATION
WORK HOURS
Fulcrum pin
Positioning hydraulic
jack
Greasing
10 h
11 MAIN FAILURES
MAIN FAILURES
CAUSE
CURE
Hydraulic jack
controls do not work
Hydraulic pump
demaged
Replace pump
The snow blade
moves without
operating the
controls
Cylinder gasket worn Replaced gasket
Fitting is leaking
Fitting is slack
Tighten the fitting
−
14 -
