Washer (4x8mm)
Screw (4x25mm)
Washer (4x8mm)
Washer (4x8mm)
Screw (4x35mm)
Spring Washer (4mm)
Nut (4mm)
4mm
In case of 2-cycle & 4-cycle engine.
Ply (15x15x2mm)
2
Ply (15x15x2mm)
4
Blind Nut (4mm)
5.2mm
Blind Nut
153mm
Fuel tank (550cc)
1
TP Screw (2.3x8mm)
5
1
Engine mount (68x105mm)
Linkage Stopper
4
4
12
4
Washer(4x8mm)
Screw (4x35mm)
Spring Washer (4mm)
Nut (4mm)
4
Screw (4x25mm)
2
Plastic tube (2x400mm)
4
Blind Nut (4mm)
2
Ply (15x15x2mm)
Two nacelle bottom covers are supplied for optional assembly of door,
which is decided by customers.Hardware package is not included.
TP Screw (2.3x12mm)
6
TP Screw (2.3x12mm)
2
5mm
Assemble the engine.
The front view when the engine install completion.
Drill four holes at the diameters as shown for
engine mount.
The side view when the engine install completion.
Install the bottom cover.
39
40
41
42
8
38
Accessory list for the coming installation steps.
1
6
Pin hinge(24x24mm)
Stab joiner (12x230mm)
B'
B
A = A '
B = B '
Make sure to glue securely.
If not properly glued, a failure in flight may occur.
Temporarily fasten down the main wing and
check its correct position.
Securely glue together.If coming off during flights,
you'll lose control of your airplane which leads
to accidents!
A
A '
4
Matal douel (4x30mm)
1
Rib template (3mm ply)
4mm
1
Rib template (3mm ply)
A ccording to thr rib template drill holes to the tail of
fuselage as below.
3
Pin hinge(2.5x48mm)
4mm
4
Wood dowel (4x30mm)
Drill two holes at the stabilizer root base via rib template
and epexy the wood dowel in them.
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
1
Stab joiner (12x230mm)
1
1
Screw (2x10mm)
Nut (2mm )
1
Copper ball (2mm )
U-style wire
2mm
Metal arms
Screw (2x10mm)
Nut (2mm )
Copper ball
Trim the shaded section
1
U-style wire (150x3mm)
1
U-style wire (150x3mm)
Assemble horizontal tail separately and be sure
with the right way.
Assemble the stablilizers carefully to fuselage.
Set the U-style wire through the tail of fuselage as
below.
22
23
24
25
26
5
Accessory list for the coming installation steps.
