background image

Bona

®

 FlexiSand Power Drive

 Manual

12

bona.com
800.872.5515

Bona

®

 FlexiSand Power Drive

 in General

The machine is only intended for work on level surfaces with a maximum slope 

of 2%. The machine is not intended for pure concrete sanding. Never run the 

machine over power cables, or you may risk a short circuit.

The operation of the Bona

®

 FlexiSand Power Drive

 is subject to applicable national regulations.

Beyond the user manual and the applicable rules in the country for preventing accidents, the applicable technical trade provisions for 
safety and professional work methods must be followed.

The Bona

®

 FlexiSand Power Drive

 is only intended for indoor use at temperatures between 10˚C (50˚F) and 35˚C (95˚F) and in good 

lighting. When you work with the machine, be observant of the surroundings and particularly persons nearby. Do not use the machine 
around children. The manufacturer is not responsible for injuries that occur via such use. In this case, the user assumes full risk. In 
addition to the normal usage instructions, the manufacturer's care and maintenance instructions must also be followed.

The manufacturer is not liable for any damage to the machine resulting from prohibited changes. The manufacturer is not liable for 
damage to the machine or to the floor covering to be sanded.

Warranty (Cont.)

THE WARRANTY DOES NOT COVER

• 

Consumable materials such as wheels, electrical cables, abrasives, lamps, etc.

• 

Indirect damage, damage and errors that occur due to external damage, accidents, and/or repairs performed outside of our knowledge 

and approval, or damages for another reason outside of our control.

• 

Transport damage or transport costs. In the event of transport damage it is up to the receiver to contact the relevant transport 

company for compensation.

• 

Cases of incorrect use, overloading, carelessness or poor maintenance

• 

The use of parts produced by another company outside of our control.

• 

Electrical components, if the voltage variations are beyond those set out in the technical specification.

• 

If payment for the machine is not made according to the agreement.

Normal use

Summary of Contents for FlexiSand Power Drive





















Reviews: