Bona
®
FlexiSand Power Drive
™
Manual
8
bona.com
800.872.5515
Safety Instructions (Cont.)
Never remove or disable the ground in the electric cable.
Consult an electrician if the ground is missing or if you suspect that your circuit is not
properly grounded.
There is a risk of electric shock if the machine is used in a circuit that breaks repeatedly or is under-
sized. Allow an authorized electrician to control the fuse, breaker or power supply.
There is a risk of personal injury if the grinder runs over and damages the cord. Ensure that the cord
does not come into contact with the sanding disc. Always lift the cord over the machine and grind in
a direction away from the cord. Do not pull the machine by the cord.
Always use a ground that breaks the current immediately in the event of a fault in the electrical
system or in the extension cord.
In order to prevent unintentional start of the machine, the power cord must be
removed when the machine is not in use or during service.
Moving parts of the machine can cause serious personal injury and/or material damage. Keep hands,
feet and loosely fitting clothing away from all moving parts of the grinder.
Because dust from sanding (red lead, certain types of wood and metal) is hazardous to health, a face
mask of at least class P2 must be used.
There is a risk of damage to the eyes and/or body if protective clothing and/or protective
equipment is not used during sanding. Always use protective glasses, protective clothing, ear
protection and a face mask of at least class P2 during sanding.
Read the instructions
contained in this user
and maintenance
manual before using
the machine.
Hearing protection
during use is
recommended.
Protection of the
airways during use
is recommended.
Hazard due to
moving parts.
Hazard due
to electricity.