Bona FlexiSand
6
Repairs, Service and Maintenance
Service
Bona FlexiSand is a high quality machine and is tested by authorized test staff at the factory before
delivery. However, electrical and mechanical parts wear down and age during long-term use.
In order to keep the machine in a safe and functioning condition, service must be performed every 250
work hours or at least once a year. This service includes control of wheels, cable stand, dust skirt sanding
disc and coal brushes. Motor, micro switches and handle shaft function is controlled.
Only Bona's original parts may be used because the machine is considered unique, otherwise safety
functions can become impaired.
Always disconnect the power cable to the machine before it is cleaned, tools are changed, maintenance is
performed or when worn parts are replaced.
When you contact us in the event of a fault or to order spare parts, always specify the type and serial
number of your machine.
This information is located on the type sign of the machine.
The machine may never be cleaned using a high pressure washer or hose.
Spare parts and exploded views
On the Internet, you will find a list of spare parts and exploded views for Bona FlexiSand and other
machines in our product range.
The address is:
http://spareparts.bona.com/
During the factory warranty period, service or repairs may only be carried out upon approval by a manager
at Bona Division Sanding and only performed by staff at Bona AB or approved staff at Bona AB Division
Sanding.
Other repairs (after the warranty period) of mechanical or electrical parts on the machine may only be
carried out by Bona AB Division Sanding approved staff or authorized technician who has experience and
knowledge concerning safety regulations.
