Bona FlexiSand
13
Starting the machine
1. Press in the button located on the top of
the handle.
2. Lower the handle shaft to the desired
position. The machine will not start if
the shaft is not lowered at least 10º..
3. Press one of the buttons for the switch
lock.
4. Then press the start handle to start,
release the switch lock button.
Carefully lift the handle and the machine will move to the right. If the handle is lowered then the machine
will move to the left. Find a balanced position on the machine and use small up and down motions when
you start to prevent that the machine travels.
If the machine becomes difficult to handle, release the start handle and the machine will stop directly!
Moving backward or forward is normally achieved by going in the desired direction. If you want more
power then tip the buffer slightly sideways. To the right, it will move backwards and to the left, forwards.
If you hold the handle in mid-position the machine will work on the spot.
Warning!
If you have not operated a Bona FlexiSand previously!
Ensure that no one or nothing is nearby before you start the machine.
Test first on a large empty surface with only a pad, this makes the machine easier to maneuver.
