Bona FlexiSand
4
DANGER
means that you or other staff can suffer a serious injury or death if THE
INSTRUCTIONS MARKED WITH
DANGER
ON THIS MACHINE OR IN THESE USER
INSTRUCTIONS are ignored or are not followed.
Read the entire user manual before
you use the machine.
WARNING
means that you or other staff can suffer an injury if the instructions marked
with
WARNING
on this machine or in this user manual are ignored or not followed.
The machine or other property may also be damaged if instructions marked with
WARNING
are ignored.
Under adverse conditions, a mixture of dust and air can be explosive.
Sanding/polishing of wooden floors can
create an environment that can be explosive.
The safety routines below
must
be followed.
Cigarette lighters, control lamps and all other sources of ignition can cause explosions if they are active during
sanding.
All sources of ignition should be extinguished or if possible removed completely from the work area.
In work areas with poor ventilation, an explosive environment can occur if certain flammable materials, that is to say solvents,
thinners, alcohol, fuel, certain polishes, wood dust and other flammable materials are in the atmosphere.
Floor grinders can cause
slightly flammable materials and vapours to burn.
Read the manufacturer’s label on all chemicals to be used so that you can
determine the flammability.
Ensure that the work area always has good ventilation.
Hitting a nail during sanding can produce sparks and cause explosion or fire.
Always use a hammer to pound in any metal pieces
before sanding the floor.
Always keep a
fire extinguisher (ABC-class or water) available.
Use of a machine that is not complete or that is not fully mounted can result in personal injury or damage to property. Never use
these machines before they are fully mounted.
Ensure that all fastening devices are fixed.
Make adjustment as per the machine
specifications.
NOTE!
Never remove or disable the earth lead in the electric cable.
Consult an electrician if the earth lead is missing or if
you suspect that your circuit is not properly earthed.
There is a risk of electric shock if the machine is used in a circuit that breaks repeatedly or is under dimensioned.
Allow an
authorized electrician to control the fuse, breaker or the power supply.
The operator or other persons present can be injured if the power to the machine is connected while maintenance is performed.
Always remove the cord to the machine from the power point.
There is a risk of personal injury if the grinder runs over and damages the cord.
Ensure that the cord does not come into contact
with the sanding disc.
Always lift the cord over the machine and grind in a direction away from the cord.
Always use an earth fault breaker that breaks the current immediately in the event of a fault in the electrical system or in the
extension cord.
In order to prevent unintentional start of the machine, the power cord must be removed when the machine is not used and
during service.
Use of the machine with a damaged cord can cause electric shock.
Do not pull the machine by the cord.
Movable parts of the machine can cause serious personal injury and/or material damage.
Keep hands, feet and loosely fitting
clothing away from all movable parts of the grinder.
If a floor grinder is used without all protection, discs or covers in place it may lead to personal injury or material damage.
The operator or other persons present can be injured if the power to the machine is connected while maintenance is performed, or
while tools are changed.
