-- 9 --
⑥
CVBS1, CVBS2,CVBS3, Y/C INPUT SELECT
-
Used to select Composite Signal(CVBS), Y/C(S-Video)Signal.
-By pressing this button, it converts Input modes between CVBS1,2,3 and Y/C mode
⑦
FULL/SPLIT
-Used to convert Display Mode between Full Mode and Split Modes
-FULL Mode : shows 1 signal source only.
-SPLIT Mode :shows 2 or 4 signal sources together
⑧
SHIFT
-Used to convert another Display mode in Split mode
-Split mode provides 10 different layouts
(For details, refer to 7. Split Mode Lay Out)
⑨
FUNCTION(F1,F2)
-Carries out the item selected in the SYSTEM Menu
-You can assign desired function into each button.
⑩
MENU
-Used to start OSD MENU. Please refer to category 6
⑪
BLUE/GRAY(
▲
)
1)
When this button is pushed, Display Color is shown only with B(blue)signal or it shows
only Luminance without color. Each time being pressed, it converts Blue-> Gray->
Color
2)
When OSD Menu is ON, it works as UP(
▲
) button
3)
Please note : In SPLIT MODE, this function applies all split window simultaneously
⑫
Ch, SELECT
-Used to select desired channel in SPLIT Mode.
