BOMBARDIER Sea-Doo GTX, Operator'S Manual

Page: 82 / 196

EQUIPMENT
219001878-035_a
RETAINING BRACKETS FOR WAKEBOARD
RACK
1. Lower retaining bracket
2. Upper retaining bracket
1. Hooked portion of rack in lower bracket
2. Rotate the rack upwards and push
the top of the rack inboard until the
handle locks into the top retaining
bracket.
2.1 Insert the hooks of the lower
portion of the rack into the
lower retaining bracket
2.2 Rotate the rack upwards and
push the top of the rack in-
board.
219001878-036_a
Step 1: Insert
Step 2: Rotate
WARNING
If rack is not properly secured on
the watercraft, it could become
loose and detach unexpectedly,
creating a risk of injury to people
nearby. Periodically ensure the
rack is properly locked on its sup-
port.
3. When installing a wakeboard on
the rack, position wakeboard fin(s)
outward with the heel of the boots
facing down near freeboard of the
PWC.
4. Secure wakeboard using bungee
cords.
WARNING
To avoid possible injuries and cuts
from the wakeboards fin(s), al-
ways place FIN(S) OUTWARDS.
219001878-038
WAKEBOARD INSTALLED WITH FINS
OUTWARD
5. After installation, pull and push
wakeboard to ensure it is tightly
secured to rack.
WARNING
If the wakeboard is not properly se-
cured on the rack, it could become
loose and detach unexpectedly,
creating a risk of injury to people
nearby. To avoid:
– Inspect bungee cords condition
and replace if damaged.
– Secure wakeboard properly on
rack.
– Periodically ensure the board is
properly attached.
NOTE: When the wakeboard is re-
moved from its rack, secure the
bungee cords so that they will not
move freely when riding watercraft.
80
______________