BOMBARDIER Sea-Doo GTX, Operator'S Manual

Page: 76 / 196

EQUIPMENT
Seat Removal
To remove the seat, push on the two
release buttons and lift the back end of
the seat.
219001878-022_a
RELEASE BUTTONS
Then pull the latch handle up and re-
move the seat from the watercraft.
219001878-032_a
1. Latch handle
Seat Installation
To install the seat, insert the forward
end of the seat in it's retainer.
219001878-021_a
1. Seat retainer
Insert the forward part of the rear seat
into the retainers.
219001878-032_b
1. Seat retainers
Align the seat latch with the latch pin
and firmly press down on the rear por-
tion of the seat to lock it in place.
219001878-023_a
LATCH PINS
Pull up on the rear portion of the seat to
ensure it is properly latched.
CAUTION Ensure the latch is
properly locked onto the pin.
6) Passenger Handholds
The seat strap provides a handhold for
a passenger to hold on to when riding.
The sides of the molded grab handle at
the rear of the seat also provide a hand-
hold for a passenger. The rear portion
of the molded grab handle provides a
handhold for the skier/wakeboarder (if
applicable) spotter or boarding the wa-
tercraft from the water.
74
______________