Section 01
MAINTENANCE
Subsection 02
(PERIODIC INSPECTION CHART)
01-02-1
PERIODIC INSPECTION CHART
0
NOTE:
Servicing period is given in hours. Shaded area shows the maintenance frequency.
➀
Every 10 hours in salt water use.
➁
These items have to be initially checked after 25 hours. Thereafter, servicing to be made as specified
in this chart.
➂
Daily flushing in salt water or foul water use.
DESCRIPTION
FREQUENCY
Every
10 hours
Every
25 hours
Every
50 hours
Every
100 hours or
seasonally
Lubrication/corrosion protection of metallic components
➀
Engine ignition timing
Spark plug replacement
Fuel injector cleaning
Fuel injection sensors verification
Throttle cable, inspection/lubrication
➀
Flame arrester inspection
Throttle cable adjustment
RAVE valve cleaning
Engine counterbalance shaft oil level
Water flow regulator valve inspection
Oil injection pump adjustment
Oil filter inspection
Oil filter replacement
Engine head bolts, retorque
Steering system inspection
Reverse system/reverse cable adjustment
Fastener tightening (flame arrester support, throttle body, engine mount, exhaust
system, etc.)
Muffler, battery and reservoir fastening devices
Fuel/oil lines, check valve and hose inspection,
fuel system pressurization
Fuel/vent line pressure relief valve inspection
Bailer pick up inspection
Battery condition
Ground connections (starter, battery, etc.)
Monitoring beeper
Jet pump reservoir oil level/oil condition
Jet pump oil replacement
Jet pump cover pusher inspection
Impeller condition and impeller/wear ring clearance
➁
Drive shaft boot/spline condition (both ends)
➁
PTO flywheel lubrication
Floating ring and boot inspection
Water intake grate condition
➁
Hull condition
Cooling system flushing
➂
Summary of Contents for SEA-DOO GTX RFI 5666 1998
