BOMBARDIER SEA-DOO GTX RFI 5666 1998, Manual

Page: 11 / 47

Section 01 MAINTENANCE
Subsection 04 (STORAGE)
01-04-3
Install a hose pincher to water return hose of the
magneto cooling circuit.
1. Hose pincher to water return hose
Disconnect engine water return hose.
TYPICAL
1. Disconnect engine water return hose
Install a hose pincher to engine water supply
hose.
TYPICAL
1. Hose pincher installed on the engine water supply hose
Temporarily install a short piece of hose to engine
water outlet at cylinder head.
Insert a funnel into hose and pour antifreeze mixed
with water in engine until the colored solution ap-
pears in the water return hose of the magneto cool-
ing circuit.
Remove temporary hose and reconnect engine
water return hose.
Remove hose pinchers.
Most of the antifreeze will drain out from the fit-
ting near the exhaust outlet when removing the
hose pinchers. Use a container to recover it. Dis-
pose of antifreeze as per your local laws and reg-
ulations.
NOTE: Although antifreeze will mainly drain out,
the antifreeze has mixed with the water that was
possibly trapped in the cylinder water jackets and
thus preventing freezing problems.
At pre-season preparation, drain the remaining an-
tifreeze from cooling system prior using the wa-
tercraft.
F07E07Y
1
F06E0EA
1
F06E0FA
1