BOMBARDIER 1983 Everest 500, Operator'S Manual, Page: 134 / 161

Autoshift mode does not work
1. Multifunction switch problem.
–
Contact an authorized Bombardier ATV dealer.
2. TPS sensor is defect.
–
Check TPS connector on carburetor.
–
If the connection is good, contact an authorized Bombardier ATV dealer.
3. Engine.
–
Contact an authorized Bombardier ATV dealer.
Cargo box does not latch properly
1. Debris in locking mechanism.
–
Remove debris, clean locking mechanism and close cargo box.
2. Debris or object underneath cargo box.
–
Remove any object or debris underneath cargo box and close it properly.
The RPM increases but the vehicle does not move
1. Transmission is set on PARK or NEUTRAL.
–
Move the transmission lever to R, H or L position.
2. CVT is defective.
–
Contact an authorized Bombardier ATV dealer.
3. Water in the CVT housing.
–
Contact an authorized Bombardier ATV dealer.
134
_____________________