BOMBARDIER 1983 Everest 500, Operator'S Manual, Page: 112 / 161

I: Inspect, verify, clean, adjust,
lubricate or replace if
necessary EVERY
C: Clean
L: Lubricate
R: Replace
Initial in-
spection
10 h or
30 days
or 250 km
(150 m.)
(1)
25 h or
625 km
(388 m.)
50 h or
1250 km
(777 m.)
100 h or
1 year or
2500 km
(1553 m.)
200 h or
2 years or
5000 km
(3107 m.)
To be
performed
by
SUSPENSION
Swing arm
(2)
I Dealer
Shock absorbers (2) I Dealer
A-arms lubrication I Customer
BRAKE
Brake fluid (front and rear) (2) I I R
(6)
Customer
Brake cable (6) I I Dealer
Brake pads
(6)
I
(4)
Customer
Brake system
(discs, hoses, etc.)
(6)
I Customer
BODY/FRAME
Engine compartment C C Customer
Skid plates EVERY RIDE Customer
Frame I Dealer
Hitch/trailer ball condition
(if installed)
EVERY RIDE Customer
Chassis Fasteners I Customer
Seat fasteners EVERY RIDE Customer
Front storage compartment cover
latches
(2)
EVERY RIDE Customer
Cargo box release lever I Customer
Cargo box gate latches
(2)
I Customer
Vehicle cleaning and protection C (4) Customer
(1) To be performed by an authorized Bombardier ATV dealer. The initial maintenance is very im-
portant and must not be neglected.
(2) Pre-ride inspection item.
(3) Every 100 hours, check coolant strength.
(4) More often under severe use such dusty area, sand, snow, wet or muddy conditions
(5) Make sure the spark plug is correctly gapped.
(6) Brake fluid replacement or any brake system repairs must be performed by an authorized Bom-
bardier ATV dealer.
112
_____________________